Building a lake
Posted 2012-10-07

We decided it would be fun to add water to our haunted house. There was already a plan to enter a cave so why not have to cross some dark water on a tiny bridge to get there. The cave idea was created because half of our haunted house is under a metal car port and the other half is outside of it. Since the car port has walls down part of the side you have to duck under the wall to exit. This makes for a great cave entrance.

We started by finished the walls to the floor with plywood. We rounded out the opening with the plywood and later covered the door with lots of Styrofoam to save the heads we are sure will make contact. We outlined the water area with logs and wood we had on hand and screwed them together well. There will be a lot of pressure on these from the water so they need to be well connected. We built our bridge out of wood we had on hand.


We used billboard tarps to line our pool and cover the walls. You can get these from your local billboard company (usually free). We used one to line the pool and a second bunched up to make the walls. In the next picture you can see it all wrapped and the pool filled with water.



We will add greenery, some stepping stones across the bridge (nailed down for safety) and a rope along one side to hold onto.

Comments:


By guest 2013-10-21

wow



Name Email URL

Comment:

Scary Movie Monday
Event Highlights
Carnival Builds
Prop How Tos
Haunted House from Pallets
Haunted Doll House
Downloads and Printables
Photo Gallery
2017 Pure Fright Hay Ride
2016 Fun House
2015 Claustrophobia
2014 Nightmare
2013 Haunt Hotel
Contact Me




Follow by email: